1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909
Show Price
We just bought this 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909, using the discount and the cost-free shipping. Made it the very best price on the net when we bought it initially of this month. after doing a bunch of research and reviewing the reviews in other places. I received this item about 2 days back and am extremely delighted with the product, Up until now so excellent. I am completely in love with this 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909, It is a high quality item and having clever functions.
Saved a ton of $$$$$
I was quoted a price of almost $300 to replace my condenser fan motor. For a fraction of that price, this motor matched the specs perfectly, except that this one has ball bearings at each end to ensure even longer life. It was easy to install, I think it took me a couple of hours. I had to trim the shaft and I cut the mounting studs a little shorter. It seems to be a quality part, on par with the original or even better. Mine didn't come with any instructions, so you will need to know a little about wiring a motor. I was able to find specific information online for connecting the included capacitor, as my unit has a combined type of capacitor.
1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 Description
Application Information: Condenser Fan (Air Conditioner). Permanent Split Capacitor motor, Totally Enclosed-air over. Shaft down or Horizontal mount. All angle mount sleeve bearings, CSA certified, UL recognized, 60 degrees ambient temperature rating. Ball bearings. Motor has 4 drilled and tapped holes in shell.
1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 Features
- 1.8 amps @ 230 Volts 60hz.
- Shaft: 1/2" x 6 1/2" Rotation = Reversible - Bolt Circle - 5.2"
- Belly Band Mount or Base Mount - Required 5 MFD 370V Capacitor Included
- Motor Length Less Shaft = 4"
- 1 Year Manufacture Warranty
This item has made me and my family so very pleased. I really like 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 very much, this is good for me. And would be perfect for someone like me, I really like it. If you are trying to find a Fan Motors, so i highly suggested this product to you. I bought this product at a price that offers in U.S.A.
Most Underlined Buyer Review : A good value
I ordered this motor to replace an OEM unit that cost over $200 without the capacitor or shipping. For about $50, I got the motor, capacitor, and shipping.
This is a 4-wire motor, so if you are replacing a 3-wire unit, you'll have to take care to wire it properly. There are pointers to be found on the Internet - if you know an electrician or technician, you might ask for a little advice.
Also, the motor can be wired to run forward or reverse with a pair of jumper wires - mine had to be swapped to rotate the fan properly (pulling air out of the condenser unit).
Another issue is that the studs holding the body together are very long. Once I tested operation of the motor, I removed each screw to trim about 1" so that I could move the fan blade as high as possible. The shaft is about 6" long, but I did not trim the excess from it.
Finally, the wires from the motor are only about 18" long. That may not be long enough for some applications...
0 komentar:
Posting Komentar